Bright and early!
Take advantage of attractive early purchase conditions for AMAZONE winter service spreaders NOW and look ahead to the next winter with peace of mind!
GET OFF TO A FLYING START with mounted spreaders for winter road gritting
Benefit from an early bird bonus of up to 5 %!
Talk to your AMAZONE
--> factory representative!
EK-S – reliable and economical
With working widths of up to 8 m (depending on the material to be spread) and hopper sizes of 150 l, 260 l and 370 l, it is perfect for medium application rates.
- Lightweight design for small compact tractors
- Manually adjustable, multi-element spread width deflector made from stainless steel
- Hopper cover and protective sieve are standard
- Easy pre-set slide for rate setting
- Maintenance-free, oil-immersed gearbox or direct drive via a hydraulic motor
- EK-S mounted spreader
E+S – the technology with Snow-how
The E+S with working widths from 1 m to 8 m provides excellent lateral and longitudinal distribution and high work rates.
- Steep hopper walls for optimum flow of the spreading material
- Important moving parts such as nuts and bolts, the entire bottom assembly, spread width deflector, spreading disc and spreading blades are made from stainless steel
- Extremely resistant multi-layer paint finish, powder coating and zinc phosphating extend the service life of the spreaders
- Available in two hopper sizes, 300 l and 750 l, and with optional bolt-on extensions up to a capacity of 1,110 l
- Now also with stainless steel hopper tip
- E+S 01 mounted spreader
IceTiger – safely through ice and snow
The IceTiger winter salt spreader is available in two sizes. The IceTiger S is equipped with a 380-litre hopper which can be increased in steps up to a maximum capacity of 920 l by means of hopper extensions. The IceTiger is its “big brother”. This has a 1,000-litre hopper which can also be increased up to a maximum capacity of 1,900 l by means of hopper extensions. The working width can be set very precisely from 1 m to 8 m, both symmetrically and asymmetrically, via the EasySet 2 in-cab terminal, the AmaTron 4 ISOBUS terminal or any other ISOBUS-compatible terminal. Ideal for narrow footpaths, wide roads or major junctions.
IceTiger S – precision down to the last detail
- Hopper capacity of 380 l (can be extended to 920 l max. with hopper extensions of 180 l and 360 l)
- W 1 and W 2 precision spreading discs with working widths from 1 m to 8 m
- Hydraulically-driven floor belt
- Manual or electric delivery point adjustment
IceTiger – precision with high efficiency
- Hopper capacity of 1,000 l (can be extended to 1,900 l max. with hopper extensions of 300 l and 600 l)
- Optional installation of 2 integrated brine tanks with a capacity of 250 l. These have a favourable centre of gravity and are equipped with a hydraulic pump for a precisely adjustable supply of brine.
- W 2 precision spreading discs with working widths from 2 m to 8 m
- Hydraulically-driven floor belt
- Manual or electric delivery point adjustment
- IceTiger mounted spreader
Easy going in the snow
For E+S and IceTiger - EasySet 2 in-cab terminal
EasySet 2 is the ideal in-cab terminal for those looking for convenient and simple operation. With its carefully selected partner software, the EasySet 2 in-cab terminal offers the facility for logging the machine data with a GPS reference. This data can be documented in the fleet management system.
Benefits of EasySet 2:
- Intuitive operation for multiple drivers
- Forward-speed dependent application rate control
- Pre-metering can be provided via the traffic light function before the tractor starts moving
- With manual delivery point adjustment: The delivery point is adjusted directly on the spreader; the required spread rate and the desired working width are set via the EasySet 2 Display of the working width (m), rate (g/m²), forward speed (km/h)
- + 100% function for doubling the spread rate on critical areas, e.g. bridges and junctions
- Calibration button for calibrating the working width, speed and application rate for road salt and brine
