English
AMAZONE fertilising advisory service
Fertiliser service
As one of the biggest European fertiliser spreader manufacturers AMAZONE always endeavours to provide the farmer with hightech machinery for best operational results under consideration of the demands of environmental care. For research and development a new fertiliser test hall is available since end of 2009. Among others, here basic tests with regard to most different problems are carried out. The evaluation is done via calculator assisted simulations. With the aid of spreading tests the setting values for the setting chart are also determined.
Please find detailed information of the new test hall and a video on the bottom of this page.
Fertiliser data base
When utilising high class centrifugal fertiliser broadcasters farmers and agricultural contractors require the availability of precise information about an optimum machine setting.
Therefore, comprehensive setting charts, easy to handle measuring and calibration device and the fertiliser service by phone are granted by AMAZONE.
Via the internet every user of AMAZONE fertiliser spreaders can query the machine setting depending on the implement type, working width and kind of fertiliser. The web server makes use of the existing data base. The advantage of this online query is that new measuring results and kinds of fertiliser can immediately be considered. Moreover, the farmer or agricultural contractor can check at any time whether his setting chart is still up to date.
» to Web-Daten Base
Laboratory-Tests
In addition to the test hall AMAZONE offers the fertilising service: Our fertiliser spreader customers will get advice by phone in difficult fertiliser queries. In such cases the fertiliser data base offers the correct settings. If the fertiliser is not listed in the data base a laboratory test at customer's expense on the basis of a 3 kg sample will provide you with the correct setting values. Download of service card for laboratory test.
You will reach our fertiliser service by calling phone No. ++49 5405 501-111 from monday till friday from 8.00 - 13.00 h local time or by fax ++49 5405-501-374.
Mobile Service (only applicable for Germany)
Zur Kontrolle von Zentrifugaldüngerstreuern unter Praxisbedingungen steht der Schalenprüfstand zur Verfügung. Spezielle Einflußfaktoren des Betriebes und der Zustand der Technik werden berücksichtigt. Erfahrene Mitarbeiter können mit den Testeinrichtungen angefordert werden. Darüber hinaus ist auf Wunsch ein Wartungsdienst möglich.
Most modern spreading hall in the world
With the new fertiliser spreader test hall for research, development and production quality support, opened in October 2009, AMAZONE now has the latest technology for testing spreaders with fertiliser and other spreadable materials, which means that AMAZONE will continue to offer its customers the most up to-date fertiliser service in the world.
As part of a complete renovation inside the existing test hall, a newly designed testing rig that included innovative measuring and evaluation technology was installed. This has resulted in a whole host of crucial improvements. Now fertiliser spreaders with working widths of up to 72 m can be tested, new kinds of fertiliser can be tested even more quickly for their material and spreading properties, and the corresponding recommended settings for AMAZONE fertiliser spreaders can be updated accordingly.
When you enter the new test hall, the first thing you notice is a hydraulically-driven turning and lifting platform equipped with weighcells. Two fertiliser spreaders can be mounted on it at the same time. Along a central longitudinal axis that starts at the platform, there is a 42 m long measuring beam with 84 collecting funnels (50 x 50 cm). Every funnel opens out into a measuring container fitted to an on-line weigh-cell.
When a spread test is carried out, the fertiliser spreader fitted to the lift frame turns about a vertical axis through a defined distance at a defined speed, spreading the set amount of fertiliser. At the same time, each of the 84 online weigh-cells records its collected amount of fertiliser at a rate of 5 measurements a second. So during a test run, there are tens of thousands of precise weight measurements that are then converted into a spread pattern using a special computer simulation programme. It is now possible using the new on-line weigh-cell technology to analyse not only the lateral distribution but also the spatial distribution of the spread tests. This brings crucial benefits to the on-going development of fertiliser spreaders and technology such as automatic boom section control (GPS-Switch).
In addition to quicker and more precise results, there are other further improvements. Since two fertiliser spreaders can be mounted simultaneously on the turning and lifting frame, the set-up times are reduced, which means that while a test just carried out on the first spreader is being evaluated, the next test can already be underway on the second spreader. For this reason, and because of the other innovations, the test capacity is substantially increased from an average of 12 previously to up to 100 tests per day in the future. There are also benefits associated with environmental protection and the conservation of resources. The energy required for dehumidifying and air conditioning the hall was reduced by 40 %. A new floor and a central under floor conveyor belt provide greater flexibility and speed when cleaning the hall. The fertiliser can be carefully collected and made available in good condition to local farm.
For the practical application of AMAZONE fertiliser spreaders, it is crucial that the AMAZONE fertiliser service ensures an economic and environmentally friendly use of fertiliser. All types of fertilisers available in the country and also abroad have been investigated over a period of 25 years. All relevant data is determined in the AMAZONE spreading hall and entered in a database.
Video - DüngeService 2010
