BOOKS AND MORE
BOOKS AND MORE

D9 mounted seed drill

Details

The AMAZONE Liftpack system

D9 System Huckepack

The AMAZONE "Liftpack" system enables the combination of a D9 Super or D9 Special with an AMAZONE KE rotary harrow and KG rotary cultivator in conjunction with the AMAZONE roller programme.
In this way seedbed preparation and sowing is done in one operational pass.With a few quick release catches, the D9 can be uncoupled for solo operation.
To reduce the lifting power requirement and to increase the ground clearance underneath the coulters during transport and when turning, the seed drill is raised upwards and forwards by the AMAZONE "Liftpack" system.
Additionally available: coupling parts for the D9 to enable the rigid mounting to a soil tillage implement.

 

Seed box

Saatkasten

The strong folding seed box lid, rubber sealed, covers the large seed box and protects its contents from ingress of rain water and dust. With its tubular handle and a gas filled strut the lid is comfortably handled. The enlarged seed boxes and extensions allow for capacities varying from 450 litres to 1000 litres on a 3 m working width. Large access steps and strong handrails offer complete safety when walking onto the loading board.
Inserts available as option prevent the seed from running downhill in hilly terrain.

Metering and calibration with the highest precision

Vario-Einstellgetriebe

With the infinitely variable and step-less Vario gearbox, seed rates from 400 kg down to only 1.5 kg per hectare are sown with the utmost of accuracy. Needless to say, all seeds, such as rape, grass, grain, peas and beans, are metered with the same uniform accuracy. The infinitely variable, step-less Vario gearbox is maintenance-free and easy to handle. For sowing rape the agitator shaft is stopped by pulling out a lynch pin. By just releasing a couple of clamps the machine is ready for calibrating.

Accurately metered, your seed is worth its weight in gold!

Dosiersystem Vario-Control

The new metering system has been optimised with regard to both accuracy of delivery and longitudinal distribution. This has been achieved by combining the 80 mm Control seed wheel in conjunction with the newly designed bottom flap and metering housing. Because of the large diameter of the seed peg wheels, the seed is singled within the metering system over a prolonged period. The even drive is ensured by the infinitely adjustable Vario gearbox.
The combination of fine seed wheel (orange) and normal seed wheel (green) allows the application of seed rates of  between 1.5 and 400 kg/ha without a seed wheel change. The changeover is carried out via a hand push pin.
With the AMAZONE metering system, the seed wheels are predominately force-fed from above similar to a cell wheel. Deviations between the calibration test and actual seed rate because of uneven seed wheel filling is avoided.

 

Seed rate adjustment

Saatmengenfernverstellung

The in-cab seed rate adjustment allows the varying of the seed rate to match the soil conditions whilst on the move. The hydraulic seed rate adjustment is connected to the tractor valve together with the hydraulic coulter pressure and harrow pressure adjustment. Where the coulter and harrow pressure needs to be increased, for example on clay caps, the seed rate can be increased as well. With the electronically controlled seed rate adjustment in conjunction with AMADRILL+ or AMATRON 3 the seed rate can be changed up and down in % increments of choice.

 

Conventional and mulch sowing with mechanical seed drill combinations

Aufbausämaschine AD

For sowing on ploughed land, the rotary harrow, tooth packer roller and a mechanical seed drill equipped with WS suffolk coulters make a superb combination. The rotary harrow cultivates and levels the soil followed by the tooth packer roller re-consolidating the soil. Because of this, the seedbed is optimally prepared for the following WS suffolk coulters. 
For mulch sowing, a combination of rotary cultivator, wedge ring roller and seed drill with RoTeC Control   coulters is recommended. The rotary cultivator loosens, even in heavy, hard soils and maintains its working depth due to the "on grip" tines. The straw is simultaneously incorporated and, thanks to the large clearance between the tines, the straw-soil mixture can pass through both there and also over the top of the tine carriers without a problem. The following levelling board levels any ridges and furrows.
The wedge ring roller reconsolidates the soil in strips so that one third of the soil is reconsolidated whereas two thirds of the surface remain loose. The RoTeC Control coulters then sow the seed precisely into the reconsolidated strips.

RDS Roller Drill System - the system for improving seed emergence and increasing yields

Roller Drill System

1. Controlled reconsolidation of the seed furrow with the wedge ring roller: To ensure an optimum water supply to the seed, the wedge ring reconsolidates the soil in strips along the seed furrow. 
2. Controlled seed Placement with RoTeC Control coulters:  in the groove left by the reconsolidated strips, the RoTeC Control roll coulters run especially smoothly, tracing a very accurate furrow and placing the seed on to the reconsolidated bottom of the furrow. 
3. Controlled seed embedding with the roller harrow: the harrow covers the seed with soil and offers an adjustable intensity. In addition, the press rollers press the soil above the seed.

 

Precise seed placement even in stony soils

Roller Drill System weicht Steinen aus

When hitting a stone the RoTeC Control coulter is only lifted once. Whereas it is lifted twice with a parallelogram mounting system where the coulter is rigidly fixed to the roller.

Wedge ring roller: targeted reconsolidation ...

Keilringwalze

The roller's primary task is seedbed reconsolidation. Wedge ring rollers use rubber rings to form reconsolidated strips into which the seed is sown. The harrow that follows covers the seed with loose soil from the unconsolidated areas either side.
This reconsolidation in strips ensures that the soil conditions around the plant is always ideal for the current weather conditions, and so provides the best chance of rapid, uniform plant development. The wedge ring roller thus serves as insurance for just-in-time cultivation.
The wedge rings leaves a homogeneous, pre-consolidated strip without any stud marks. Compared to rollers with other profiles, this is a decisive advantage, resulting, above all, in a smooth run of the sowing coulters.

Seed embedment with the RoTeC Controll disc coulter

Rotec-Control-Schar

RoTeC Control coulters operate virtually wear-free.  Even where large amounts of straw and trash prevail they won't block up. The combination of the sowing disc on the one side and the furrow former on the other create the perfect seed furrow and optimum seed control. The elastic polyurethane disc also helps to create the seed furrow, accurately controls the pre-set sowing depth and prevents soil from sticking to the sowing discs.

 

RoTeC: Proven by over 300,000 units!

Rotec-Control-Schare

The very even and exactly controlled depth guidance of the RoTeC Control coulter is achieved via the Control 10 depth guidance disc, with a contact surface of 10 mm, or the Control 25 depth guidance option with a contact surface of 25 mm. As this depth guidance is fitted on the side of the coulter, this principle operates with more accuracy than coulter systems with a following, rigidly attached separate depth guidance roller. The depth guidance discs (or rollers) provide the basic setting of the sowing depth easily and comfortably via the coulter pressure. If necessary a notched segment allows for readjustment on the sowing coulter in 3 steps.

RoTeC-Control coulters operate at a coulter pressure of up to 35 kg. In this case the actual effective coulter pressure is comparatively higher with AMAZONE, because the pressure is not distributed between the coulter and the following press roller but acts solely on the coulter. For rape sowing, or early sowing in dry conditions, working with less coulter pressure is possible without any problem.
Depending on the machine type: row spacings from 12.5 cm to 16.6 cm.

 

 

Quality and reliability

Amazone pneumatische Sämaschinen AD-P Special und AD-P Super, Rotec-Control

• A seed disc made from high grade, Boron steel
• Less aggressive angling for reduced soil movement
• Wear resistant, height adjustable polyurethane disc for depth limiting and cleaning
The large stagger between the rear and front coulter rows ensures blockage-free sowing even where large amounts of straw prevail. With only one cutting disc per coulter AMAZONE ensures – even at a 12.5 cm row spacing and mulch sowing at high speeds – a blockage-free material passage in between the coulters.

WS suffolk coulter

WS-Schar

The WS Suffolk coulter is ideally suited for conventional sowing or where little straw prevails, e. g. after rape or turnips. The hard, cast coulter tip material ensures an extended service life. For larger farms with hardwearing soils, the quick coulter tip change, where replacement is necessary, is possible by removing just one bolt.
The coulters are arranged in 3 rows and the large coulter clearance offers security against blocking within the coulters. Inside the coulter a guide funnel delivers the seed accurately down to the coulter tip. The backup coulter flap prevents accidental coulter blockage when the drill is lowered. Depending on the machine type, row spacings from 12 up to 16.6 cm are available (see technical data).

 

Sabre coulter tip

Säbelscharspitze

For very shallow seed placement on light soils or for mulch sowing where little straw residues prevail, the sabre coulter tip has been developed. The sabre and the WS coulter tips can easily be interchanged.

Coulter pressure adjustment

On the mechanical seed drills the coulter pressure can be adjusted centrally and either mechanically or hydraulically.

 

Drag tine harrow – robust and cost effective

Schleppzinkenstriegel

The drag tine harrow is normally only used in conjunction with WS suffolk coulters. FFor soils, where little or no straw residues prevail this is a economical and soil protecting alternative. The harrow fixing features an integrated breakaway safety device to prevent damage to the harrow if the drill is unintentionally reversed.

Seed coverage with the exact harrow

Exaktstriegel

The Exact following harrow covers and levels the open seed furrows without blockage even with large amounts of straw present. With its individually pivoting harrow elements the Exact harrow follows the undulations of the soil perfectly ensuring an even seed coverage on soils either with or without straw.
Depth adjustment is carried out mechanically, centrally via two spindles. For the hydraulic harrow pressure adjustment (option) a minimum and a maximum value is predetermined by inserting pins. In this way the pressure on both the harrow and the coulters can be quickly matched to differing soils on the move with just one tractor spool valve.
In conjunction with the RoTeC pro coulter, the 15 mm strong Exact S following harrow can be used. It gives little wear and provides good seed coverage even in most difficult of operational conditions. 

 

Additional consolidation with the roller harrow

Amazone Sämaschine AD-P, Rollenstriegel

The roller harrow additionally consolidates the soil above the seed furrow resulting in the optimum germination conditions. This is recommended especially for light, dry soils when sowing spring crops or rape. An undulating surface profile that reduces erosion is the result. A special advantage offered is that the adjustment of the roller pressure is completely independent from the coulter pressure.  The roller harrow, independently adjustable from the coulter pressure, can follow the ground contour in a range of ± 100 mm.

Harrow pressure adjustment

Amazone Sämaschinen D9 und AD: Striegeldruckverstellung

The height of the Exact following harrow is steplessly adjusted via spindles whereas the central setting of the Roller harrow is carried out via a pin adjustment with overload protection allowing the very flexible adjustment of the intensity of the roller pressure, or even offers the possibility of putting the press rollers out of operation altogether. In this way the press rollers, for example during late autumn sowing under wet conditions, can be completely raised out of work. Via a series of pin positions, the drag tine harrow can be precisely adjusted.

Bout markers for D9

Spuranreißer für D9

The bout markers of the D9 Special are lifted up to the horizontal position or lowered with the aid of a hydraulically actuated marker changeover. Actuation by a single-acting tractor valve allows the hydraulic tramline control to advance at every changeover. 
On the D9 Super  hydraulic rams lift the bout markers from the operational position into the vertical transport position. This allows sowing on headlands and the convenient negotiation of in-field obstacles. When the bout markers are switched over, the tramlining control advances automatically to create tramlines in the desired rhythm. The bout markers of the D9 Super are protected against damage via shear bolts. .

D9 60 Super, 6 m working width

D9 60 Super, 6 m Arbeitsbreite

The D9 60 Super with its 6 m working width consists of two 3 m seed drills which are fitted onto a coupling frame with oversize tyres. This results in a large area seed drill at a very favourable price. For operation on light, unconsolidated soils it is possible to carry the drill on four wheels instead of the two wide terra-tyres. The compact design makes it possible for the drill to be used as a three-point linkage mounted solo machine with tractors of the 130 kW (180 HP) class.

Compelling machinery choices for large areas

D9 12000-2T Super, 12 m Arbeitsbreite,

The D9 12000-2T is a trailed combination consisting of three D9 4000 Super drills, that means, in total, a 12 m working width.  Each solo machine runs with its own running gear and can, because of this, contour follow even in extreme undulations. 
Tractors from around 180 kW (240 HP) can be used to pull the coupling frame. The D9 9000-2T in a 9 m working width consists of three D9 3000 Super drills. The three seed drills are raised with the "Liftpack" system for transport and for turning on the headland of the field. The very robust bout markers create a track for the tractor centre and when changed over, are folded into the vertical position. The centre seed drill is equipped with a tramlining mechanism that enables the creation of tramlines at 12 m, 24 m or 36 m. For transport the side machines are folded in and when folded, the transport width is approx. 6 metres. 
Each of the three D9 Super drills can also be used individually. The KR 12002 and KR 9002 coupling frames offer flexible possibilities of use and are thus especially economical. The coupling frame can be equipped, alternatively,  with the D9 seed drill, the ED precision air seeder or the Catros compact disc harrow.